Headlight Aiming 101

Driving at night proved to be tough... so .. replaced the sealed beams with halogens.. added relays and finally checked the aiming..


                                               Before

After

Had a couple of issues that I wanted to take care of..to make the car a better 20 footer

In talking to the previous/previous owner, a tree branch fell on the car several years ago..the guys at Jerry's took care of these...

Oil Cooler Lines

The look of the oil cooler lines was making me nervous.. so replaced them

Harmonic Balancer - Kaput

12/08/2012

I think I may have been driving the car more than it had been driven in years..one day I began hearing what sounded like a bad pulley..off and on terrible sound. I found that the harmonic balancer / crank pulley had separated from the rubber insert and that the outer part of the pulley was turning independent of the crank.

There are a couple of places that rebuild these.. for approx $100 but I elected to buy a used one someone offered me (MG Experience Forum) for $40 which included shipping.

This is the bad pulley..you can see the cracked rubber insert..

To get to the crank with the motor still in the car I removed the radiator (was planning on replacing coolant and hoses anyway) to free up space to unbolt the steering rack as it needs to move forward slightly.

To break the crank nut without the crank turning, (after flattening the lock washer) I connected a socket and breaker bar and wedged it on the front suspension and slightly bumped the starter..I got this idea from an old thread on the MG Experience Forum, it worked great.

Ready for new pulley

Waiting on the pulley to arrive provided some might as well opportunities...like cleaning up the fan and pulley, replacing heater hoses, repairing the windshield washer pump, etc

Bad pulley (left) and new 

Everything put back together

In all not a real difficult job, but was time consuming..

12/07/2012

Both of the steering rack boots were torn.. Replaced along with new tie rod ends.

12/1/2012

One of the first things to fix was the drivers seat..I could not move it and the recline mech was frozen..I noticed while removing the left most rear nut that the metal was cracked around the hole, I assume fatigue. I cleaned up the area, tapped the metal even and welded it.

Bought a BGT

11/28/2012

Friend of mine accepted a new job in Mexico and did not want to deal with the hassle of bringing in a car from the US..always wanted a GT and could not pass up the chance.

Engine Mount Photos

Not saying this is the perfect or most elegant method.. but it is how I mounted my MGB OD transmission into my MGA...

Interior shots of the MGA..

The finished product turned out nice..

Upholstery expert installs the head liner, not a job for I would want to do!

Rear glass installed... the worst of the glass installs.. did not help that I first had the center section upside down..

Front windshield installed..another hard task.

Rear bumper and tail lights installed

Wiring almost complete